9.
Fitting the cable
chain
Version 1:
Fit the cable chain clamp (a)
into the appropriate slot in
the cable tray from under-
neath, place the cables into
(a)
the chain and feed them into
the cable tray.
Version 2:
Screw end piece (b) of cable
chain to the underside of the
desk. Fit the cable chain
clamp (c) into cable tray.
A-leg:
Remove cover (d) (possible
on both sides), insert cables,
replace cover (e).
(b)
(c)
(d)
(e)
33