Fitting Desk Screen To The Screen - Konig + Neurath INSIDE.25 Montageanleitung

11. Fitting desk screen to
the screen
Remove upper and lower
protective caps from the
mounting side of the desk
screen (not shown).
(a) Unscrew lower slot nut
including linear connector in
the corner post, slide it up to
the correct position and screw
in place (SW 2,5).
(b) Line up the desk screen
gap with the linear connector.
(c) Snap off the lugs on the
protective caps (predetermined
breaking point).
(d) Remove corner post cover.
Position the upper linear
connector in the corner post
slot and desk screen gap and
screw in place (SW 3). Put the
protective caps on the top and
bottom on the desk screen gap
and the protective covers on
the corner post (not shown).
(e) Tighten the clamp adapter
to fix the desk screen in place
(SW 4).
(a)
bottom view
(c)
snap
off!
(e)
26
(b)
(d)
back view