C) Installation Of The Door Bracket (8); Installation Of The Door Bracket - RADEMACHER RolloPort SX5 DuoFern Originalbetriebsanleitung

9.11 (C) Installation of the door bracket (8)

NOTE!
◆ We recommend fixing the door bracket (8) to the
door frame if possible.
◆ For plastic or thin-walled wooden doors, ad-
ditional cross-beams are necessary in order to
avoid damaging the door. In this case, consult
your door supplier.
◆ Use existing drill holes, if possible, to mount the
door bracket (8).
1. Place the door bracket (8) on the top edge of
the garage door and align it with the centre of
the door (in a line with the profile slide). Next,
mark out the four fixing holes on the door frame.
2. Punch in the fixing holes in the door frame with
the aid of the enclosed spike.
NOTE!
Self-tapping screws need sufficient purchase in the
material. Check the thickness of your door frame.
If it is sufficiently thick you can also pre-drill the fixing
holes with a 4 mm metal drill bit if you are not able to
punch in the holes with the spike.
60
8
9
10
Legend
8 = Door bracket
9 = Bolts (8 x 20 mm)
10 = Self-tapping hexagon screws (6 x 15 mm)
11 = Securing bolt (2 x 20 mm)
12 = Door connector, bent
CORRECT
Fixing hole made using
spike
The screw has sufficient
support
EN
11
12
WRONG
Fixing hole made by
drilling
The screw does not have
sufficient support