Attachment Of The Door Operator And The Rail - RADEMACHER RolloPort S2 Bedienungsanleitung

Attachment of the door operator and the rail

(A)
A / B / C / D refer to the following pages
Installation on the lintel
The installation should preferably be on the lintel, as
this means that the forces encountered can best be
absorbed.
Installation on the ceiling
For installation on the ceiling, you should rotate the
header bracket by 90 degrees and fix it to the ceiling
further inward. The full rail length can then be used as
a result.
NOTE
When fitted to the ceiling, the distance to the door leaf
must be a maximum of 25 cm.
IMPORTANT
In the case of garage walls or garage ceilings made of
stone (concrete), use the enclosed hexagon screws
(8 x 60) and wall plugs ∅ 10 mm.
42
(C)
(D)
(B)
Installation
on the
lintel
Installation
on the
ceiling
GB
min. 1,5 cm
max. 25 cm