Opening Speed Setting - RADEMACHER RolloPort SX5 DuoFern Originalbetriebsanleitung

10.8 Opening speed setting

(can also be configured for RolloPort SX5 DuoFern via HomePilot®)
With this function you can set the speed of the upwards
movement to your individual requirements.
1. Press "P" for approx.
5 seconds.
4. Press "+" or "–" and
select the desired
opening speed.
1 = 11 cm / s
2 = 15 cm / s
3 = 19 cm / s
(maximum)
68
Configuration of the upwards movement speed is set
in cm/s (centimetres per second).
2. Press "+".
(press several times if
necessary) until "8" is
displayed.
5. Press "P" in order to
store the setting.
3. Press "P", the display is "1".
1 = 11 cm/s opening
speed
3 = 19 cm/s = factory setting
6. Conclude programming
(see page 70 / Method 2)
or proceed with next setting.
EN