Connect the magnetic closure of the USB charging cable
fitness wristband as pictured. Make sure that the USB charging cable is
properly attached. The battery will only be charged if this is the case.
You can see the current charge level in the battery status display.
Normally the battery takes about 2 hours to fully charge.
As soon as the device's battery is fully charged, the following
notice will appear in the display.
contacts on the back of the device are wet. If necessary, carefully
pat the charging contacts dry with a cloth. If a battery has leaked,
wear protective gloves and dispose of the device.
Functions
Overview of functions
The fitness wristband has the following functions: time with date and
battery status, pulse measurement, pedometer, calories burned, distance
covered, time active, daily goal, alarm, move reminder, sleep mode and
message / call notifications.
The values are reset to zero at midnight every 24 hours. Counting then
restarts from zero.
Do NOT charge the fitness wristband if the charging
with your
2
GB/IE
47