Faster Multifaster SPEL 08-3 Installation Seite 17

17
E. MultiFaster does not connect.
E1. Check if the lines are under pressure.
To connect 2P series MultiFaster with lines under pressure, it's
necessary to act on the lever with a higher force.
Instead, the 3P series MultiFaster are connectable without effort.
E2. In case the manual connection is impossible don't use extension or
other tools.
E3. Decrease the pressure by unscreawing slightly the fittings.
Don't use sharp tools to pull back the couplings valve
E4. If the lines are not under pressure, ensure that the lever or the
guiding pins are not damaged. In case they are replace them.
F. MultiFaster does not disconnect
F1. Push the safety lock button before lifting the lever. Ensure that
the lever is not deformed. Check that there is no pressure on the lines
and replace the lever. Don't use extensioner or other tools to force
disconnection. Just act on the safety lock button.