Connection, Disconnection - Faster Multifaster SPEL 08-3 Installation

12
Connection
Open the dust cover of the fixed part. Push the safety lock button
while lifting the lever up. Put the mobile part on the fixed one. Engage
the guiding pins in the correct housings. Engage the rolling pins in the
cams profiles. Turn down the lever till stop. Connection is achieved
once the safety button releases automatically.
Disconnection
Hold firmly the lever and push the safety button. Lift up the lever till
the rolling pins are free from the cams profiles. Place the mobile part
on the suitable support. Close the dust protection on the fixed part.