Kohler 14/20RESA Betriebsanleitung Seite 41

Status
Displays
Press the Up and Down arrow buttons
to move between menus.
Press OFF or AUTO to exit the menus.
* ATS Configuration appears only if a Model RXT transfer switch is connected.
[ PIM Status appears only if a programmable interface module is connected.
] Load Control appears only if a load control module (LCM), a load shed kit, or a Model RXT transfer switch
with combined interface/ load management board is connected.
Figure 3-9 RDC2 Main Menu
TP-6804 1/15
Overview ---->
1.2 h
Engine ---->
Metering
Generator---->
Metering
Genset ---->
Information
Genset ---->
Run Time
Genset ---->
System
ATS ---->
Status
ATS ---->
Configuration *
Date ---->
and Time
Network ---->
Information
PIM ---->
Status [
Load ---->
Control ]
Event Log ---->
Section 3 RDC2 Controller Operation
tp6804
39