Signs And Symbols Used En; Symbol Description; Scope Of Delivery; Optional Accessories En - Abicor Binzel ABI-CAR E-1200 Betriebsanleitung

4 Scope of delivery

Welding torch neck diameter
Possible weld length
Material/workpieces
Tab. 3 General device data
3.2 Abbreviations
ABI-CAR E-1200
ABI-CAR E-1200-O
AC/DC
Tab. 4 Abbreviations
3.3 Signs and symbols used
The following signs and symbols are used in the operating instructions:

Symbol Description

• Bullet symbol for instructions and lists
Cross-reference symbol refers to detailed, supplementary, or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery
• Welding tractor (partially pre-assembled; clamping
unit is not pre-assembled)
• Power supply
• Allen key set
The following components are required to ensure full functionality of the ABI-CAR E-1200:
• MIG/MAG welding equipment
Tab. 5 Scope of delivery
4.1 Optional accessories
• Fasteners for welding torch mount if diameter differs
Tab. 6 Optional accessories
The welding torch and replacement, equipment, and wear parts must be ordered separately. The order data and ID numbers
for the replacement, equipment, and wear parts can be found in the current spare parts list .
 13.1 Spare and wear parts on page EN-31
Contact details for support and placing orders can be found online at www.binzel-abicor.com.
EN - 10
16–22 mm standard model, 20–30 mm as an option
Up to 4,000 mm; restricted also up to 5,000 mm
(only in consultation with ABICOR BINZEL)
All metal surfaces to which the magnet adheres.
Welding tractor
Welding tractor with pendulum device (oscillating)
Alternating current/direct current
• Power cable
• Cable for connection to welding power source/wire feeder
• Operating instructions
• Guide rail system for horizontal/vertical operation
ABI-CAR E-1200 / E-1200-O
BAL.0647.0 • 2020-06-05