Safety Instructions; Regulations/Guidelines - Meibes SolaVentec II Technische Information Für Montage Und Betrieb

1. Safety instructions

Read these instructions carefully before installing. The installation and commissioning of the complete station may only be performed by
an approved, specialist company. Please familiarise yourself with all the parts and their handling before starting work.
Please follow these safety instructions faithfully to eliminate hazards, personal injury and material damage.

1.1 Regulations/guidelines

Observe the applicable accident prevention regulations, environmental regulations and legislation for the assembly, installation and opera-
tion of the system. In addition, observe the applicable guidelines of the DIN, EN, DVGW, VDI and VDE (including lightning protection) and all
current relevant country-specific standards, laws and guidelines.
Electrical connection: Electrical connection work may only be carried out by qualified electricians. The VDE guidelines and the provisions
of the responsible energy utility company must be observed.
Extract:
Solar thermal systems and their components:
DIN EN 12975 Solar collectors
DIN EN 12976 Ready-made systems
DIN EN 12977 Customised systems
Installation and design of water heaters:
DIN 4753, Part 1: Water heaters and water heating systems
for drinking and process water.
DIN 18 380: Heating systems and central water
heating systems.
DIN 18 381: Installation of gas, water and drainage pipework
inside buildings.
DIN 18 421: Insulation of service installations.
AV B Wa s V: Ordinance for the general
conditions of water supply.
• Read the installation instructions before use
• Risk of being cut
• Risk of crushing
• Risk of high temperatures
• Risk of electrical voltage
• Risk of falling or tripping
Electrical connection:
VDE 0100: Set up of electrical equipment, earthing,
protective conductors, equipotential bonding conductors.
VDE 0701: Inspection after repair, modifi cation of
electrical appliances.
VDE 0185: Protection against lightning.
VDE 0190: Specifi cations for the use of piping systems for protective
measures in electric power installations.
VDE 0855: Installation of antennae equipment
(to be applied analogously).
Additional guidelines:
VDI 6002 Sheet 1: General principles, system technology and
use in residential buildings
VDI 6002 Sheet 2: Applications in student accommodation,
retirement homes, hospitals, indoor swimming pools
and on camping sites
17