Replacement Parts/Accessories; Trouble Shooting; Corrective Action - Parkside PSSSA 20-Li A1 Originalbetriebsanleitung

Replacement parts/Accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu
If you have issues ordering, please use the contact form. If you have any other questions,
contact the "Service-Center" (see page 35).
Position Description
4.1 Saw blade for metal T118A, cordless jigsaw saw
4.2 Saw blade for wood T144D, cordless jigsaw saw
5 Slide shoe
11.1 Saw blade for metal SE 922 AF, cordless sabre saw
11.2 Saw blade for wood SE 644D, cordless sabre saw

Trouble shooting

In the event of an accident or malfunction, remove the battery from the device im-
mediately! Failure to comply may result in injuries from cuts.
Problem
Appliance won't
start
Intermittent
operation
Poor sawing per-
formance
Saw blade quickly
becomes blunt
Possible cause
Battery (14) not inserted
Battery (14) discharged
On/Off switch (3) defective
Motor defective
Internal loose contact
On/Off switch (3) defective
Saw blade (4.1/4.2/
11.1/11.2) is blunt
Incorrect sawing speed
Low battery power
Too much pressure applied
Sawing speed too high

Corrective action

Insert battery (14) (Observe the se-
parate operating instructions for the
rechargeable battery and charger)
Recharge battery (14) (Observe the
separate operating instructions for the
rechargeable battery and charger)
Send in to Service Centre for repair
Send in to Service Centre for repair
Insert a new saw blade (4.1/
4.2/11.1/11.2)
Adjust sawing speed
Charge the battery (14) (observe
the separate operating instructions
for the battery and charger)
Reduce the pressure
Reduce the sawing speed
GB IE
Order no.
13800403
13800406
91105733
13800405
13800404
33