Residual Risks; Assembly; Assembling/Removing The Slide Shoe - Parkside PSSSA 20-Li A1 Originalbetriebsanleitung

GB IE
ces or a vice is held more securely than
with your hand.
• Secure the workpiece. A workpie-
ce that is retained with clamping appli-
ances or a vice is held more securely
than with your hand. Do not support
the workpiece by hand or foot.
• Hold the power tool tightly while wor-
king and ensure a secure footing.
• Do not touch any objects or the
ground with the saw running.
There is a risk of kickback.
• Switch the appliance off immedi-
ately if the saw blade jams. Force
apart the saw cut and pull the
blade out carefully. This can lead to
loss of control over the power tool.
• Do not saw any materials (e.g.
lead-based paints and coatings
or materials containing asbes-
tos) whose dust can be harmful.
• Wait until the power tool has stopped
before placing it down. The attachment
tools can jam and lead to a loss of con-
trol over the power tool.

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
28
magnetic fi eld which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the
instruction manual for
your battery and char-
ger from the Parkside
X 20 V Team series. A
detailed description of
the charging process and
further information can
be found in the separate
operating instructions.

Assembly

Only insert the battery once
the power tool is fully ready
for use.
Assembling/removing
the slide shoe
When working on scratch-sensitive work-
pieces, working with the slide shoe (5) is
recommended.
Attaching the slide shoe
1. Place the slide shoe (5) on the front of
the bottom plate (6).
2. Now, press the two notches (5.1) on the
back of the slide shoe over the base-
plate (6).