Technical Data - Parkside PSSSA 20-Li A1 Originalbetriebsanleitung

Technical data

Cordless Jigsaw
and Sabre Saw ...... PSSSA 20-Li A1
Nominal input voltage ................. 20 V
Idle speed n .....................0 - 3000 min
0
Saw stroke .................................. 20 mm
Cutting depth in wood
Cordless Jigsaw ................ max. 50 mm
Cordless sabre saw ......... max. 100 mm
Cutting depth in metal
Cordless Jigsaw .................. max. 4 mm
Cordless sabre saw ........... max. 50 mm
Weight (with battery) ............... ca. 2,1 kg
Sound pressure level
(L ) ................... 86,4 dB(A), K
pA
Sound power level
(L ) .................97,4 dB(A), K
WA
Vibration (a ) 2
h
Cordless Jigsaw
in wood a .... 8,27 m/s
h,B
in metal a .. 11,17 m/s
h,M
Cordless sabre saw
in wood a .... 8,76 m/s
h,B
in metal a .... 9,18 m/s
h,M
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
Battery (Li-Ion) ...............PAP 20 A1
Battery cells ......................................... 5
Nominal voltage ......................... 20 V
Capacity ..................................... 2.0 Ah
Energy .....................................40 Wh
Charging time .................... approx. 1 h*
-1
= 5 dB
pA
= 5 dB
WA
; K= 1,5 m/s
2 2
2 ; K= 1,5 m/s 2
; K= 1,5 m/s
2 2
2 ; K= 1,5 m/s 2
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
* The charge time will only be achieved with
the PLG 20 A1 charger.
Charger ..............................PLG 20 A1
Nominal consumption .....................65 W
Voltage input ............ 230-240 V~, 50 Hz
Voltage output ......................... 21,5 V
Voltage current ..............................2,4 A
Safety class .....................................
Miniature fuse ............................. T3.15A
Attention! This charger can only
recharge the following batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
Levels of noise and vibration were determi-
ned according to the standards and regula-
tions in the declaration of conformity.
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
GB IE
II
23