Safety Information For Sawing Back And Forth - Parkside PSSSA 20-Li A1 Originalbetriebsanleitung

f) Do not expose batteries to fi re
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for char-
ging and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions. Incorrect charging or charging
outside the permitted temperature ran-
ge may destroy the battery and increa-
se the risk of fi re.
6) SERVICE
a) Have your power tool serviced
by a qualifi ed repair person
using only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batte-
ries. All battery repairs should be
carried out by the manufacturer or au-
thorised customer service centres only.
Safety information for
sawing back and forth
• Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring. Contact
with a live wire can also cause a
charge in metal parts of the device and
result in an electric shock.
• Fasten and secure the workpie-
ce by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock
or fi re.
• Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the bla-
de there is a risk of injury.
• Move the power tool against the work-
piece only when it is turned on. Other-
wise, there is a risk of kickback if the
attachment tools jam in the workpiece.
• Make sure that the footplate/slide shoe
is resting securely on the workpiece
during sawing. A tilted saw blade may
break or cause a kickback.
• After you have fi nished work, turn the
power tool off and do not pull the saw
blade out of the cut until it has come to
a standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or
cause kickback.
• Do not brake the saw blade after swit-
ching the device off by applying side
pressure. The saw blade may be dama-
ged, break or cause a kickback.
• Use suitable detectors in order to fi nd
hidden supply lines or consult the local
utility company.
Contact with electric cables can lead to
fi re and electric shock.
Damage to a gas pipe can cause an
explosion. Penetration into a water line
causes property damage.
• Check the material to be pro-
cessed for foreign bodies, such
as nails, screws etc. which must
be removed.
• Secure the workpiece. A workpiece
that is retained with clamping applian-
GB IE
27