Safety Instructions; Symbols And Icons; General Safety Directions For Power Tools - Parkside PSSSA 20-Li A1 Originalbetriebsanleitung

GB IE
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the trimmer.

Symbols and icons

Symbols on the device:
The device is part of the Park-
side X 20 V TEAM series.
CAUTION!
Read the instruction manual
Wear hearing protection
Wear safety goggles
Wear a respiratory mask
Wear protective gloves
Electrical devices must not be dispo-
sed of with domestic waste.
Symbols in the manual:
Warning symbols with infor-
mation on damage and inju-
ry prevention.
Instruction symbols with information
on preventing damage.
Wear cut-resistant gloves
24
Help symbols with information on
improving tool handling.
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.
Retain all safety directions and ins-
tructions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of fl ammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use