Ottobock Myo Plus Gebrauchsanweisung Seite 28

INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the MyoPlus app.
After turning on Bluetooth, it remains active for approx. 5 minutes. The app must be started and
the connection established during this time.
1) Tap the icon for the Myo Plus app
→ The end user licence agreement (EULA) is displayed.
2) If rights are requested the first time the app is started, these have to be granted. Otherwise,
the app cannot be started.
3) Accept the end user licence agreement (EULA). If the end user license agreement (EULA) is
not accepted, the Myo Plus app cannot be used.
4) The "Bluetooth connection" menu item is opened.
5) Tap to establish a connection.
6) Select the desired component from the list.
7) Enter the Bluetooth PIN code and tap "Connect".
→ The icon is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the component. Then the
radar chart is displayed.
8.3 Control elements of the Myo Plus app
2
28
.
1. Access online help
2. Display and name of the currently selected motion sequence
3. Connection to component has been established
4. Display of the selected screen
5. Display of the currently selected menu item
6. Access the navigation menu