Registering The Remote Control Codes For Playback Devices - Yamaha R-N500 Bedienungsanleitung

Registering the remote control
codes for playback devices
You can use the unit's remote control to operate playback
devices if you have registered their remote control codes.
You can also use the input selection keys to change the
playback devices that are controlled by the remote control,
because their remote control codes are assigned to the
input selection keys.
SOURCE
ID DIMMER
COAX1 COAX2
LINE1 LINE2
TUNER CD
FM AM
1 2
5 6
9 0
TV INPUT
TV VOL
TV MUTE
1
Refer to "LIST OF REMOTE CONTROL
CODES" (end of this manual) to find the
remote control code for your playback
device.
y
If there are multiple remote control codes, register the first code
in the list. If that does not work, try the other codes.
2
Press CODE SET using a pointed object such
as the tip of a ballpoint pen.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this
happens, repeat from Step 2.
3
Press the input selection key.
For example, press CD to set the remote control code
for the playback device connected to the CD jack.
4
Use the numeric keys to enter the 4-digit
remote control code.
Once the remote control code is successfully
registered, "Rem: Success" appears on the front
display.
If "Rem: Fail" appears on the front display,
registration has failed. Repeat from Step 2.
CODE SET
CODE SET
RECEIVER
SLEEP
SPEAKERS
A B
OPT1 OPT2
Input selection
LINE3 PHONO
keys
USB NET
PRESET TUNING
3 4
Numeric keys
7 8
+
10 ENT
TV
TV CH
Controlling external devices with the remote control
■ Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following
keys after selecting the input source or scene.
SOURCE
SOURCE A
ID DIMMER
COAX1 COAX2
HOME
SETUP
Menu operation
ENTER
keys
DISPLAY
DISPLAY
TOP
MENU
DISC SKIP
1 2
5 6
9 0
TV INPUT
TV VOL
TV MUTE
SOURCE A
Cursor keys
Menu
operation ENTER
keys
RETURN
DISPLAY
TOP MENU
POP-UP
MENU
s
e
External
device
operation
h
keys
w
f
b
a
Numeric keys
TV operation keys
Note
These keys work only if the corresponding function is available
on your playback device and if the device can be operated with an
infrared remote control.
CODE SET
RECEIVER
SLEEP
SPEAKERS
A B
OPT1 OPT2
NOW
PLAYING
OPTION
VOLUME
RETURN
POP-UP
MUTE
MENU
External device
operation keys
3 4
Numeric keys
7 8
+
10 ENT
TV
TV operation
TV CH
keys
Turns on/off the playback device.
Select an item.
Confirms a selected item.
Returns to the previous state.
Switches information on the
display.
Displays the top menu.
Displays the pop-up menu.
Stops playback.
Stops playback temporarily.
Starts playback of the selected
song/video.
Searches forward/backward (by
holding down).
Skips forward/backward.
Enter numerical values.
Control the TV (p.36).
37
En