Playing Back Itunes/Ipod Music Via A Network (Airplay); Playback Of Itunes/Ipod Music Contents - Yamaha R-N500 Bedienungsanleitung

PLAYING BACK ITUNES/IPOD MUSIC VIA A NETWORK (AIRPLAY)

Playing back iTunes/iPod music via a network (AirPlay)
The AirPlay function allows you to play back iTunes/iPod
music on the unit via network.
PC
iTunes
Starts playback
on iTunes
or iPod
Router
iPod
Note
To use this function, the unit and your PC or iPod must be
connected to the same router (p.13). You can check whether the
network parameters (such as the IP address) are properly assigned
to the unit in "Information" (p.32) in the "SETUP" menu.
AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion, and Mac and
PC with iTunes 10.2.2 or later.
(as of August 2013)

Playback of iTunes/iPod music contents

Follow the procedure below to play back iTunes/iPod
music contents on the unit.
1
Turn on the unit, and start iTunes on the PC
or display the playback screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay
icon ( ) appears.
iTunes (example)
Note
If the icon does not appear, check whether the unit and PC/iPod
are connected to the router properly.
2
On the iTunes/iPod, click (tap) the AirPlay
icon and select the unit (network name of the
unit) as the audio output device.
iTunes (example)
Network name of the unit
28
En
The unit
Playback starts
iPod (example)
iPod (example)
3
Select a song and start playback.
The unit automatically selects "AirPlay" as the input
source and starts playback. The playback information is
displayed on the front display.
y
• If you press the DISPLAY repeatedly, you can switch the
playback information on the front display (p.29).
• You can turn on the unit automatically when starting playback
on iTunes or iPod by setting "NET Standby" (p.32) in the
"SETUP" menu to "On".
• You can edit the network name (the unit's name on the network)
displayed on iTunes/iPod in "Network Name" (p.33) in the
"SETUP" menu.
• If you select the other input source on the unit during playback,
playback on the iTunes/iPod stops automatically.
• You can adjust the unit's volume from the iTunes/iPod during
playback. To disable volume controls from iTunes/iPod, set
"Vol.Interlock" (p.30) in the "OPTION" menu to "Off".
Caution
• When you use iTunes/iPod controls to adjust volume, the
volume may be unexpectedly loud. This could result in damage
to the unit or speakers. If the volume suddenly increases during
playback, stop playback on the iTunes/iPod immediately.
Use the following remote control keys to control playback.
p
s
External device
e
operation keys
b
a
Repeat
Shuffle
Note
To control iTunes playback with the remote control of the unit,
you need to configure the iTunes preferences to enable iTunes
control from remote speakers in advance.
iTunes (example of English version)
Check this box
Resumes playback from pause.
Stops playback.
Stops playback temporarily.
Skips forward/backward.
Changes the Repeat settings
Changes the Shuffle settings