Automatic Preset Tuning (Fm Stations Only); Auto Preset; Manual Tuning Preset - Yamaha R-N500 Bedienungsanleitung

Listening to FM/AM radio
Automatic preset tuning
(FM stations only)
You can use the automatic preset tuning function to
automatically register FM stations as presets. This
function enables this unit to automatically tune in to FM
stations that have a strong signal and store up to 40 of
those stations in order. You can then easily recall any
preset station by selecting its preset number.
Notes
• If a station is registered to a preset number that already has a
station registered to it, the previously registered station is
overwritten.
• If the station you want to store is weak in signal strength, try
using the manual preset tuning method.
y
• FM stations registered as presets using the automatic preset
registration feature will be heard in stereo.
• Only Radio Data System broadcasting stations are stored
automatically by the Auto Preset function.
TUNER
TUNER
FM
FM
AM
HOME
SETUP
Cursor keys B / C
ENTER
DISPLAY
TOP
MENU
1
Press TUNER to select TUNER as the input
source.
2
Press OPTION on the remote control.
The "OPTION" menu is displayed (p.30).
3
Press B / C to select "Auto Preset", and then
press ENTER.

Auto Preset

This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down the
ENTER key.
y
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET F/G or cursor key (B/C) on
the remote control.
• To cancel scanning, press FM, AM or RETURN.
18
En
CD USB NET
AM
PRESET F / G
PRESET TUNING
MEMORY
NOW
PLAYING
OPTION
OPTION
ENTER VOLUME
RETURN
RETURN
POP-UP
MUTE
MENU
VOL.
SP A
01:FM 87.50MHz
Preset number
When scanning is complete, "FINISH" is displayed
and then the display returns to original state.

Manual tuning preset

You can manually register up to 40 FM/AM stations
(40 total). You can then easily recall any preset station by
selecting its preset number.
COAX1
LINE1
TUNER
FM
MEMORY
SHUFFLE
■ Registering a radio station manually
Select a radio station manually and register it to a preset
number.
1
Follow "FM/AM tuning" (p.17) to tune into the
desired radio station.
2
Hold down MEMORY for more than 2
seconds.
The first time that you do register a station, the
selected radio station will be registered to the preset
number "01". Thereafter, each radio station you
select will be registered to the next empty (unused)
preset number after the most recently registered
number.
01:FM 98.50MHz
Preset number
y
To select a preset number for registering, press MEMORY once
after tuning into the desired radio station, press PRESET F / G
to select a preset number, and then press MEMORY again.
02:Empty
"Empty" (not in use) or the frequency currently registered
VOL.
SP A
Frequency
COAX2 OPT1 OPT2
LINE2 LINE3 PHONO
CD USB NET
AM
PRESET F / G
PRESET TUNING
MEMORY
REPEAT MODE
VOL.
STEREO
TUNED
L
SL
VOL.
STEREO
TUNED
L
SL
SW
C
R
SR
SW
C
R
SR