Network Name; Max Volume; Initial Volume; Autopowerstdby - Yamaha R-N500 Bedienungsanleitung

■ Network Name

Edits the network name (the unit's name on the network)
displayed on other network devices.
1
Select "Network Name".
Network Name
2
Press ENTER to enter the name edit display.
R-N500 XXXXXX
Network name
3
Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a character.
R-N500 XXXXXX
4
To confirm the new name, press ENTER.
5
To exit from the menu, press SETUP.
■ Update
Updates the firmware via the network.
Starts the process to update the unit's firmware.
Perform
For details, see "Updating the unit's firmware via
Update
the network" (p.39).
Displays the version of the firmware installed on
Version
the unit.
Displays the system ID number.
ID

Max Volume

Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB

Initial Volume

Sets the initial volume when the receiver is turned on.
Off (default)
Mute
VOL.
SP A
-80.0 dB to
+16.5 dB (0.5 dB
increments)

AutoPowerStdby

VOL.
SP A
Sets the amount of time for the auto-standby function. If
you do not operate the unit for the specified time, the unit
will automatically go into standby mode.
Off
2 hours,
4 hours,
8 hours (default),
12 hours
VOL.
SP A
y
Just before the unit enters standby mode, "AutoPowerStdby"
appears and then countdown starts in the front display.

ECO Mode

Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit's
power consumption.
Off (default)
On
Notes
• Be sure to press ENTER to restart the unit after selecting a
setting. The new setting will take effect after the unit is
restarted.
• When "ECO Mode" is set to "On", the front display may
become dark.
• If you want to play audio at high volume, set "ECO Mode" to
"Off".

DC OUT

Configures the DC OUT jack setting.
Power Mode
Selects how to supply power to the Yamaha AV accessory
connected to the DC OUT jack.
Cont
(default)
Sync
Configuring various functions (SETUP menu)
Sets the level to the volume level of the unit
when it last entered standby mode.
Sets the unit to mute the audio output.
Sets the level to the specified volume level.
Does not set the unit to standby mode
automatically.
Sets the unit to standby mode when you
have not operated the unit for the specified
time. For example, when "2 hours" is
selected, the unit will switch to standby
mode if you do not operate it for 2 hours.
Disables the eco mode.
Enables the eco mode.
Supplies power through the DC OUT jack
continuously regardless of the power state (on/
standby) of the unit.
Supplies power through the DC OUT jack only
when the unit is turned on.
33
En