Controls And Functions; Front Panel - Yamaha R-N500 Bedienungsanleitung

Controls and functions

Front panel

12 3
C D
1 A (power)
Turns on/off (standby) the unit.
Note
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
2 Power indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
3 Remote control sensor
Receives infrared signals from the remote control.
Note
Switch the remote control ID between ID1 and ID2 when using
multiple Yamaha receivers or amplifiers (p.34).
4 DIMMER
Changes the brightness level of the front display. Choose
brightness from 5 levels by pressing this button
repeatedly.
y
This setting is retained even if you turn off this unit.
5 DISPLAY
Selects the information displayed on the front display
(p.29).
6 MEMORY
Stores the current FM/AM station as a preset when
TUNER is selected as the input source (p.18).
4
En
Controls and functions
4 5 6 7 8 9
E F G
: A
H I J
7 CLEAR
Clears a FM/AM preset station when TUNER is selected
as the input source (p.19).
8 Front display
Shows information about the operational status of this
unit.
9 PRESET j / i
Selects a preset FM/AM station when TUNER is selected
as the input source (p.19).
0 FM and AM keys
Switch between FM and AM (p.17).
A TUNING jj / ii
Selects the tuning frequency when TUNER is selected as
the input source (p.17).
B PURE DIRECT and indicator
Allows you to listen to a source in the purest possible
sound (p.14). The indicator above it lights up and the front
display turns off when this function is turned on.
C PHONES jack
Outputs audio to your headphones for private listening.
D SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed.
E USB jack
For connecting a USB storage device (p.23) or an iPod
(p.21).
B
K L M