Restoring The Default Settings (Init); Updating The Firmware (Update); Checking The Firmware Version (Version) - Yamaha R-N500 Bedienungsanleitung

Restoring the default settings (INIT)

INIT CANCEL
Restores the default settings for the unit.
Choices
Restores the default settings for the unit.
ALL
Does not perform an initialization.
CANCEL

Updating the firmware (UPDATE)

UPDATE
New firmware that provides additional features or product
improvements will be released as needed. Updates can be
downloaded from our website. If the unit is connected to
the Internet, you can download the firmware via the
network. For details, refer to the information supplied
with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
1
Press SELECT/ENTER repeatedly to select
"USB" or "NETWORK" and press DISPLAY to
start firmware update.
Choices
Update the firmware using a USB memory device.
USB
Update the firmware via the network.
NETWORK
y
If the unit detects newer firmware over the network,
"NewFwAvailable" appears as the "Information" menu item in
"Network Setup". In this case, you can also update the unit's
firmware by following the procedure in "Updating the unit's
firmware via the network" (p.39).
Check the version of firmware currently installed on the
unit.
y
• You can also check the firmware version in "Update" (p.33) in
• It may take a while until the firmware version is displayed.
USB
Configuring the system settings (ADVANCED SETUP menu)
Checking the firmware version
(VERSION)
VERSION
the "SETUP" menu.
xx.xx
35
En