Using The Remote Control; Operation Range - Yamaha RS300B Bedienungsanleitung

■ FM/AM controls
The following buttons can be used when TUNER is
selected as the input source.
B TP
Searches automatically for a station that provides traffic
program (TP) broadcasts (see page 24).
C PRESET j / i
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 21).
D FM, AM
Selects TUNER as the input source and sets the FM/AM
tuner band to FM or AM (see page 17).
E INFO
Turns on and changes the Radio Data System display
mode when TUNER is selected as the input source (see
page 23).

Using the remote control

■ Installing batteries
AA, R6, UM-3 batteries
■ iPod controls
The following buttons can be used when DOCK is
selected as the input source for listening to an iPhone/
iPod. For more information, see page 25.
0 REPEAT
A MENU/ Ee / b / a / ENTER
E INFO
F SHUFFLE
G B
H C
■ Yamaha CD player controls
The following buttons can be used to control a Yamaha
CD player when CD is selected as the input source.
I Yamaha CD player control buttons
• s Stops playback
• e Pauses playback
• p Starts playback
• DISC SKIP Skips to the next disc in a CD changer
• b Skips backward
• a Skips forward
• Ejects the disc
• w Rewinds playback
• f Fast-forwards playback
Note
Even when using a Yamaha CD player, certain components and
features may not be available. Refer to your component's owner's
manual for more information.

■ Operation range

The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of this unit during
operation.
CONTROLS AND FUNCTIONS
Approximately
6 m (20 ft)
Remote control
9
En