Herunterladen Inhalt Inhalt Diese Seite drucken

Bosch Praesideo 4.0 Installations- Und Bedienungsanleitung Seite 68

Digitale lautsprecher- und notrufanlage
Inhaltsverzeichnis

Werbung

Praesideo 4.0
Clause/Requirement
EN 54-16:2008 (E)
(this text is used for
certification )
a
a separate light emitting
indicator (the general
fault indicator), and
Bosch Security Systems B.V.
Paragraf/Anforderung
Compliance
EN 54-16:2008 (D)
(dieser Text dient nur
(this text is used for
zur Information)
certification )
ein separates lich-
The Praesideo system provides
temittierendes Anzei-
a visual indication when it is in
geelement
the fault warning condition via
(Sammelstörungsan-
the fault LED of the call
zeige), und
stations, control output
contacts, key indicators of call
station keys, the fixed fault
output contact of the network
controller and the front panel
menu of the network controller.
All Praesideo call stations have
a specific fault indicator, the
power/fault LED, which is
blinking yellow for a system
fault and steady yellow when
there is a fault in the call
station or the Praesideo
network is not operational. The
power/fault LED is green when
there is no fault in the system.
Control output contacts can
be configured as 'Fault alarm
indicator'. A visual indicator
(e.g. a lamp) can be connected
to the output contact. The
output contact is activated
when the system enters the
fault warning condition. The
output contact is de-activated
when the system leaves the
fault warning condition, i.e.
when all faults are reset.
Call station keypad keys can
be configured to the action
'Reset fault' or 'Ack and reset
fault'. The key indicator of such
a key will now light up when
the system enters the fault
warning condition. The key
indicator is turned off when the
system leaves the fault warning
condition.
Output contact 5 of the
network controller is the fixed
Fault alarm indicator output.
Other control outputs can be
configured for the same
function. If a visual indicator is
connected to this output
contact it can be used as the
general fault warning indicator.
The network controller displays
the number of present faults.
This fault indication overrules
the normal display information.
Installations- und Bedienungsanleitung
Erfüllung
(dieser Text dient nur zur
Information)
Das Praesideo System bietet
eine optische Anzeige, wenn
es sich im Störungsmelde-
zustand befindet und zwar
über die Störungs-LED der
Sprechstellen, über Steueraus-
gangskontakte, Tastenan-
zeigen von
Sprechstellentasten, der feste
Störungs-Ausgangskontakt
des Netzwerkcontrollers und
das Menü an der Vorderseite
des Netzwerkcontrollers.
Alle Praesideo Sprechstellen
verfügen über eine spezielle
Störungsanzeige, die Betriebs/
Störungs-LED, die bei einer
Systemstörung gelb blinkt und
bei einer Störung in Sprech-
stelle oder wenn das
Praesideo Netzwerk nicht
betriebsbereit ist gelb leuchtet.
Die Betriebs/Störungs-LED
leuchtet grün, wenn im Sys-
tem keine Störung vorliegt.
Steuerausgangskontakte kön-
nen als Störungsalarm-Signal-
geber konfiguriert werden.
Eine optische Anzeige (z. B.
eine Lampe) kann an den Aus-
gangskontakt angeschlossen
werden. Der Ausgangskontakt
wird aktiviert, wenn das Sys-
tem in den Störungsmelde-
zustand geschaltet wird. Der
Ausgangskontakt ist deaktivi-
ert, wenn das System den
Störungsmeldezustand ver-
lässt, d. h. wenn sämtliche
Störungen zurückgestellt wer-
den.
Sprechstellentastaturtasten
können auf die Aktion "Störung
zurückstellen" oder "Störung
best. und zurückstellen". Die
Hauptanzeige einer solchen
Taste leuchtet jetzt auf, wenn
das System in den Störungs-
meldezustand schaltet. Die
Hauptanzeige wird ausge-
schaltet, wenn das System den
Störungsmeldezustand ver-
lässt.
Ausgangskontakt 5 des
Netzwerkcontrollers ist der
feste Störungsalarm-Signalge-
berausgang. Die anderen
Steuerausgänge können für
dieselbe Funktion konfiguriert
werden. Wenn eine optische
Anzeige an diesen Ausgang-
skontakt angeschlossen ist,
kann sie als allgemeine
Störungsmeldeanzeige ver-
wendet werden.
Der Netzwerkcontroller zeigt
die Anzahl der vorhandenen
Störungen an. Diese Störungs-
anzeige setzt die normalen Dis-
playinformationen außer Kraft.
IUI-PRAESIDEO_4.0 | V1.0 | 2013.01
de | 68
Signature
Unterschrift

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis