Signal Tones; Stand-By/Off; Setting The Time; Oven Lighting - hanseatic TV950E4AS-T00E00 Gebrauchsanleitung

Page EN-16 Operation: General information

Signal tones

When a sensor is touched, an acoustic signal
can be heard. This tells you that the oven has
understood your action.

Stand-by/Off

As soon as a power supply has been con-
nected, the oven will be in stand-by mode.
The oven is waiting for your input.
In order to switch the oven off, you must pull
the mains plug out of the socket or switch off
the applicable electric circuits.

Setting the time

(1)
You must set the time when using the oven
for the first time or after a longer power cut.
Otherwise, time-controlled operation is not
possible. The display (1) shows 00: 0 0. The
time is displayed in 24-hour format.
1. Tap the symbol (5).
In the display, both the zeros will flash for
the hour display.
2. Tap the sensor or swipe over the slid-
er (7) to set the number of hours.
3. To switch to the minute display, tap the
symbol.
4. Tap the sensor or swipe over the slider
to set the number of minutes.
5. Tap the symbol to set the time.

Oven lighting

NOTICE
Use the oven light only to illuminate the
cooking compartment. It is not suitable
for lighting a room.
The lighting can be switched on or off at any
time: Operate the

Tips for saving energy

– Preheat the oven only if it is called for in the
recipe or stipulated in the cooking tables
provided.
– Use dark-coloured baking dishes and trays
(5)
when possible. They effectively absorb the
heat.
– Avoid frequently opening the oven door
during cooking, baking or roasting.
– Bake several cakes one after the oth-
er while the oven is still warm in order to
shorten the baking time for subsequent
cakes. If you use loaf tins, place both of
them side by side in the oven.
– In the case of longer cooking times, switch
the oven off 10 minutes before the end of
the cooking time. The residual heat is suffi-
cient enough to complete the cooking.
(1)
(3)
sensor (3).