Additional Functions; Setting The Start Time; Timer - hanseatic TV950E4AS-T00E00 Gebrauchsanleitung

Additional functions

Setting the start time

(1)
(10)
If you don't want the cooking process to be
started immediately, but at a certain time, you
can set a start time.
1. First, tap the sensor (13) to exit other
functions.
2. Tap the sensor (10).
The symbol will appear on the display
and the hour indicator will flash.
3. To enter a start hour from 0 to 23, tap the
sensor (10) and use the +/– sensors or
the slider (7).
4. Tap the sensor (10).
The minute indicator will flash on the dis-
play.
5. To enter a start minute from 0 to 59, tap
the sensor (10) and use the +/– sensors
or the slider (7).
6. Tap the sensor (10) to save the start
time.
7. Select the function, temperature, cooking
time etc. and tap the
When the start time is reached, you will
hear a signal tone and the cooking pro-
cess will start.
The cooking time can be changed at
any time. The change will take effect
approx. 6 seconds after the last sensor
operation.
To end the cooking process early, switch the
oven off with the sensor (13).
sensor (2).
Additional functions

Timer

(1)
(11)
Your oven is also equipped with a timer. You
set a specific period, just as you would with
an egg timer. Once the period has expired, a
tone sounds. You can set a duration of one
minute up to 23:59 hours.
Please note that the countdown timer does
not switch the oven on or off. You can also
use the countdown timer when the oven is
not switched on.
1. Briefly tap the sensor (11).
The symbol will appear on the display
and the hour value will flash.
2. To enter a number from 1 to 23:59, use
the +/– sensors or the slider (7).
3. To save the time and start the countdown,
tap the sensor (11) again.
The display will show the set time and the
residual time respectively. Once the pre-
set cooking duration has elapsed, you will
hear 5 signal tones and the display will
once again show the time.
Page EN-23