hanseatic TV950E4AS-T00E00 Gebrauchsanleitung Seite 56

Page EN-22 Using automatic programmes
Preparation:
• Remove the entire packaging and weigh
the food – the weight is needed to ensure
the correct settings.
(6)
1. First, tap the sensor (13) to exit other
functions.
2. To select the automatic mode, tap the
sensor (6) until the display shows P01.
The display shows the programme dura-
tion and the standard weight.
3. Tap the +/– sensors until the display (1)
shows the desired programme.
4. Programmes with weight setting:
Tap the sensor (4).
The weight indicator will flash.
5. Tap the +/– sensors until the display (1)
shows the desired weight. The appliance
automatically adjusts the cooking time.
6. Programmes
– without preheating:
• Place the food in the cooking com-
partment and close the door.
• To start the programme, tap the sen-
sor (2).
The lighting will switch on and the
oven will heat up.
The cooking time indicator will count
down.
(1)
(4) (2)
– with preheating ( ):
• Tap the sensor (2) to start the pro-
gramme.
The lighting will switch on; the oven
will heat up. On the display, the pre-
heating symbol
preheating is complete, the symbol
goes out. You will hear three signal
tones.
• Place the food in the cooking com-
partment and close the door.
• Tap the sensor (2) to continue the
programme.
The cooking time indicator will count
down.
7. The programme run is complete when
you hear five signal tones and the display
shows End. Remove the food.
will light up. When