Introduction; Purpose Of This Operating Guide; Trademarks; Additional Resources - Danfoss VLT Compressor Drive CDS 803 Bedienungsanleitung

VLT® Compressor Drive CDS 803
Operating Guide

1 Introduction

1.1 Purpose of this Operating Guide

This operating guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instruc-
tions and general warnings. Always keep this operating guide available with the drive.

1.2 Trademarks

®
VLT is a registered trademark for Danfoss A/S.

1.3 Additional Resources

Other resources are available to understand advanced drive functions and programming.
• The programming guide provides greater detail on working with parameters and shows many application examples.
• The design guide provides detailed information about capabilities and functionality to design motor control systems.
• Supplementary publications and manuals are available from Danfoss .
See www.danfoss.com for supplementary documentation.
VLT® Motion Control Tool MCT 10 software support
Download the software from the Service and Support download page on www.danfoss.com.
During the installation process of the software, enter CD-key 34544400 to activate the CDS 803 functionality. An activation key is
not required for using the CDS 803 functionality.
The latest software does not always contain the latest updates for the drive. Contact the local sales office for the latest drive updates
(in the form of *.upd files), or download the drive updates from the Service and Support download page on www.danfoss.com.

1.4 Manual and Software Version

This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
Table 1: Manual and Software Version
Edition
AQ321748767627xx-xx0101

1.5 Type Approvals and Certifications

The following list is a selection of possible type approvals and certifications for VLT® Compressor Drive CDS 803 drives:
Name of certification
EC Declaration of Conformity
UL listed
UL recognized (only valid for CDS 803 - S096)
RCM
EAC
UkrSEPRO
VLT® Compressor Drive CDS 803 drives having S096 in the type code (400 V AC, 18.5–30 kW (25–40 hp)) are certified to UL/EN/IEC
60730-1. The drive is also designed for systems that have to be compliant with UL/IEC/EN 60335.
For more information on UL 508C thermal memory retention requirements, refer to the section Motor Thermal Protection in the
product-specific design guide.

1.6 Disposal

Do not dispose of equipment containing electrical components together with domestic waste.
Danfoss A/S © 2019.12
Remarks
New power sizes added to product range.
Software version
6.0–10 kW (8–15 hp): Version 2.0
18–30 kW (25–40 hp): Version 1.00
Certification logo
089
AQ32174876762701-000101 / 130R0627 | 5
Introduction
IP20
✓
✓
✓
✓
✓
✓