PALSON Caprice Gebrauchsanleitung Seite 31

E
The coffee is too cold.
No steam comes out of the steam
nozzle.
There is not enough foam during
foaming.
Uneven cup filling
The espresso has a burnt taste.
The pump makes an unusual
noise.
The coffee maker does not work.
Downloaded from www.Manualslib.com
The cups, filter and filter holder are
cold.
When making a cappuccino or white
coffee, the milk is not hot enough.
The steam nozzle is blocked.
The milk is not fresh.
The milk is too hot.
Jug
The steam nozzle is blocked.
The milk has boiled.
Pressure is not uniform or the filter
holder spouts are blocked.
Faulty baffle in the filter holder.
The type of coffee used.
The coffee maker has not been
rinsed after descaling.
There is no water in the tank.
The water tank is not correctly
positioned.
The water outlet filter may be
blocked.
The coffee maker is blocked by
accumulated sediment.
manuals search engine
Warm the cups, filters, filter holder.
See "Instructions for making a
perfect espresso".
Make sure that the milk is heated
properly during foaming, but without
boiling. See "Instructions for frothing
the milk".
See "Care and cleaning".
Make sure that the milk is fresh.
Make sure that the milk is properly
refrigerated before use.
To get the best results during
foaming, use a stainless steel jug
and, if possible, refrigerated or put
under the cold water tap before use.
See "Care and cleaning".
Start again with fresh, refrigerated
milk.
Make sure that the coffee is
uniformly tamped and check that the
filter holder spouts are not blocked.
Contact the Authorised Service
Centre.
Try different brands.
Circulate a tankfull of water through
the coffee maker before making
another coffee.
Fill the tank with water.
Reinstall the water tank firmly in the
appliance.
Remove the filter holder and clean
the water outlet. See "Care and
cleaning".
See "Descaling".
31