Maintenance And Storage; Electrical Safety - Parkside PRMA 20-Li A1 Originalbetriebsanleitung

- after a collision with a for-
eign object. Immediately
examine the device for dam-
age and, if necessary, have
it repaired,
- if the apparatus starts to
vibrate in an unusual way
(check immediately!).
• When starting or turning the
motor on, the lawnmower must
not be tilted, unless it is requi-
red to lift the lawnmower in the
process. In this event, tilt it only
as far as absolutely necessary
and lift it only on the side fa-
cing away from the user.

Maintenance and Storage:

• Allow the motor to cool before
storing the equipment in a con-
fi ned space.
• During maintenance of the cut-
ting blades, be aware of the
fact that even if the power sup-
ply is switched off, the cutting
blades can be set into motion.
• Ensure that all nuts, bolts and
screws are tightened fi rmly and
the equipment is in safe work-
ing condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specifi ed in these
instructions is to be carried out
only by customer service centres
that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid fi n-
gers being trapped between the
rotating blades and fi xed parts
of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.

Electrical Safety:

• The plug of the charger must fi t
into the socket. The plug must
not be modifi ed in any way.
Do not use any adapter plugs
together with electric tools that
have a protective earth. Unmo-
difi ed plugs and matching so-
ckets reduce the risk of electric
shock.
• Avoid body contact with
earthed surfaces such as pipes,
radiators, cookers and refriger-
ators. There is an increased risk
of electric shock if your body is
earthed.
• Do not expose electric tools to
rain or wet conditions. The pen-
etration of water into an electric
tool increases the risk of electric
shock.
• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric
shock or fi re
GB IE
25