Maintenance And Storage; Electrical Safety - Parkside PRMA 40-Li B3 Originalbetriebsanleitung

again and working with it,
• If the apparatus starts to vibrate
excessively, an immediate check
is required.
• Make sure that all nuts, bolts
and screws are properly tight-
ened.
• Inspect the apparatus for any
damage.
• Have any necessary repairs car-
ried out on damaged parts.
• Do not bring your feet or hands
into the vicinity of rotating parts
(or beneath them). Never stand
in front of the grass ejector
opening.
• When starting or turning the
motor on, the lawnmower must
not be tilted, unless it is required
to lift the lawnmower in the
process. In this event, tilt it only
as far as absolutely necessary
and lift it only on the side facing
away from the user.

Maintenance and Storage:

• Give the motor time to cool off
before you store the device in
an enclosed space.
• During maintenance of the cut-
ting blades, be aware of the
fact that even if the power sup-
ply is switched off, the cutting
blades can be set into motion.
• Make sure that all nuts, bolts
and screws are properly tight-
ened, and that the device is in
safe working order.
• Do not try to repair the device
by yourself unless you have
professional training. All work
not specified in these operating
instructions may only be carried
out by customer service centres
authorised by us.
• Store the device in a dry place
and out of reach of children.
• Handle your device with care.
Keep the tools sharpened and
clean in order to be able to
work better and safer. Follow
the maintenance instructions.
• Wear safety gloves when re-
placing the cutting equipment.
• Check the grass collection unit
regularly for wear and tear and
deformation. Replace worn or
damaged parts in the interests
of safety. When setting up the
blades, take care that your
fingers do not become caught
between the rotating blades and
stationary parts of the machine.
• Ensure that only replacement
cutting tools approved by the
manufacturer are used.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in
electric shock or fire.

Electrical Safety:

• The plug of the charger must fit
into the socket. The plug must
not be modified in any way.
Do not use any adapter plugs
together with electric tools that
have a protective earth. Un-
GB MT
29