Working With The Equipment - Parkside PRMA 20-Li A1 Originalbetriebsanleitung

become caught and thrown up.
• Wear suitable work clothing
such as stable shoes with non-
slip soles and robust, long trou-
sers. Do not use the equipment
when barefoot or when wear-
ing open sandals. Avoid wear-
ing loose clothing or clothing
with hanging cords or belts.
• Before each use, carry out a
visual inspection of the equip-
ment. Do not use the equipment
if protective devices (e.g. colli-
sion guard or grass bag), parts
of the cutting device or bolts
are missing, worn or damaged.
To avoid imbalance, damaged
tools and bolts are to be re-
placed only in sets.
• Take care with equipment that
has several cutting tools, as the
movement of one blade may
result in the rotation of the other
blades.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
The use of non-original parts
will immediately invalidate the
guarantee.
• Worn or damaged information
signs must be replaced.

Working with the Equipment:

Do not place feet or hands
near or under rotating parts
when working. Risk of injury!
• Switch on the motor accord-
ing to the instructions and only
when your feet are at a safe
distance from the cutting tools.
• Do not use the equipment in
the rain, in poor weather, in a
damp environment, or on wet
grass. Work only in daylight or
with good lighting.
• Do not work with the equipment
when tired, lacking concentra-
tion or under the infl uence of
alcohol or drugs. Always take
breaks in good time. Take a
sensible approach to the work.
• When working, ensure a fi rm
stance, particularly on slopes.
Always work across the slope,
never upwards or downwards.
Take particular care when
changing the direction of travel
on the slope. Do not work on
excessively steep slopes.
• Run the equipment only at a
walking pace. Take particular
care when turning the equip-
ment around, pulling it towards
you or going backwards.
• Switch on the equipment care-
fully and in accordance with
the directions in these instruc-
tions. Ensure suffi cient distance
between feet and the rotating
blades.
• Do not tilt the equipment when
starting other than if it is nec-
essary to do so when starting
up in long grass. In this case,
tilt the equipment by pressing
down the handle bar such that
the front wheels of the equip-
ment are raised. Always check
that both hands are in the work-
ing position before returning the
equipment to the ground.
• Do not work without the grass
box or collision guard. Keep
GB IE
23