Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk RS 502 Betriebsanleitung

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

This Manual is an integral part of the machine; its purpose is to provide the operator with all necessary information to use
the machine properly in a safe and autonomous way. It contains information about technical data, safety, operation, storage,
maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. Contact
Nilfi sk in case of doubts regarding the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.
The operators must not carry out operations reserved for qualifi ed technicians. Nilfi sk will not be responsible for damages coming
from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The User Manual must be kept inside the machine cab, away from liquids and other substances that can cause damage to it.

CONFORMITY CERTIFICATE

Figure A shows a copy of the documentation certifying the sweeper conformity with the law in force.
NOTE
One copy of the original declaration of conformity is provided together with the machine documentation.
NOTE
If the machine is approved to be used on public roads, the machine is supplied with a special Certifi cation of Conformity.

IDENTIFICATION DATA

The machine serial number and model are shown on the adhesive label (1, Fig. C) and the plate (21, Fig. E) affi xed inside the cab.
The machine serial number is also printed on the machine side (23, Fig. G).
The diesel engine serial number and model are marked in the positions shown in the relevant Manual. The same engine data
appear on another adhesive plate applied on the frame.
This information is useful when ordering machine and diesel engine spare parts. Use the following table to write down the machine
and diesel engine identifi cation data for any further reference.
MACHINE model ....................................................................
MACHINE serial number ........................................................

OTHER REFERENCE MANUALS

The sweeper is also supplied with the following manuals:
– Diesel Engine Manual, to be considered as integral part of this Manual.
– Sweeper Spare Parts List
– Sweeper Wiring Diagram
At Nilfi sk Service Centers the following Manual is also available:
– Sweeper Service Manual

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair procedures must be performed by qualifi ed personnel or by Nilfi sk Service
Centers. Only original spare parts and accessories must be used.
Call Nilfi sk for service or to order spare parts and accessories, specifying the machine model and serial number.

CHANGES AND IMPROVEMENTS

Nilfi sk constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefi ts to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Nilfi sk.
USER MANUAL
ENGINE model .......................................................................
ENGINE serial number ...........................................................
RS 502 33019741(2)2009-12 A
ENGLISH
3