Presettings - Wellsystem Spa Original-Gebrauchsanweisung

Presettings

8 Presettings
No. Description
Enable or disable the time setting option for the user
Maximum running time
Press and hold the plus or minus button for 2 seconds in order to
activate the fast mode.
Coin operation
Maximum collagen running time
Press and hold the plus or minus button for 2 seconds in order to
activate the fast mode.
The collagen function can only be activated for the preset time
during the normal running time. Once the collagen running time
has expired, the collagen function switches off. It remains inactive
until the running time expires or is ended and cannot be reacti-
vated until the normal mode is started again.
Operating hours
Reset operating hours, press and hold the plus and minus buttons
simultaneously for three seconds, display shows 0000.
Coloured light in standby
Music in standby
Basic volume for music selection
Exit basic settings
34
In the service mode the operating states can be called up and default values
set while in standby.
See page 20.
– Press and hold the plus and minus buttons simultaneously for 3 seconds.
--.-- is shown on the display.
– Enter the four-digit code, 2909, for the service mode by pressing the plus
or minus buttons. Every number entered must be confirmed by pressing
the TRACK button.
After entering the code --.01 appears on the display.
– Press the plus or minus buttons to switch between the functions
(--.01 to --.99).
– Press the TRACK button in order to select the desired function.
– Change the values by pressing the plus or minus buttons
– Then confirm and return to the function selection menu by pressing the
TRACK button.
– The service mode ends automatically after a button has not been pressed
for 15 minutes or by selecting the function --.99.
On delivery Values from - to
FREE FREE, SEAL
45 01 - 45
OFF ON, OFF
45 01 - 45
0000 0000 - 9999
OFF ON, OFF
OFF ON, OFF
04 01 - 10
– ---