Inserting The Sd Card - Wellsystem Spa Original-Gebrauchsanweisung

09/2011 1010400-00
Removing the transport bracket
– Remove the screws and store them.
– Remove the transport bracket and store it.
Tool: Philips No. 2 screwdriver or battery-powered screwdriver with PHZ-bit 2
3.2

Inserting the SD card

NOTE:
Pre-recorded SD cards which are delivered as accessories
for a JK audio system are also subject to payment obligation
for commercial usage.
Opening the right cover:
– Press and release the cover (magnetic lock).
– Raise and remove the cover.
There are two SD card slots behind the AROMA canister.
– Insert the SD card into one of the two slots with the rear end to the front.
NOTE:
Only one SD card can be used at any time.
Assembly / commissioning
Operating instructions – 15