Personnel Training; Scope Of Delivery; Transport, Assembly And Setup; Assembly - Wellsystem SPA Original-Gebrauchsanweisung

Information for the operator
8
2.4

Personnel training

As the operator you are obliged to train your personnel and instruct them in
the established legal and accident prevention regulations. You must ensure
that your personnel have understood these operating instructions and that
they abide by them. This applies in particular to the
Information in 'Intended use' and 'Foreseeable misuse'
Safety instructions in the 'Operation' chapter
Operating instructions
Cleaning and maintenance instructions
– Please make the instructions and additional information from the manu-
facturer available to the personnel at their workplace.
– Regularly check your personnel's safety consciousness and awareness
of the risks, taking into account your operating instructions.
– Please ensure that the cleaning intervals are complied with, in particular
cleaning after every use.
– You must ensure that your staff provide your customers with appropriate
advice, in particular regarding possible risks and the operation of the de-
vice.
2.5

Scope of delivery

Information regarding the scope of delivery is contained in the 'Description'
chapter on page 17.
2.6

Transport, assembly and setup

The device is delivered by a specialist company. The operator is responsible
for the connection and installation. The device manufacturer's Customer Ser-
vice may install the device upon request.
As the operator you are responsible for abiding by the electrical regulations
applicable at the installation site, see page 9.
If the Wellsystem Spa device is to be operated together with the massage
device by means of an existing coin device, then the Customer Service must
install a connection between the Wellsystem Spa device and the massage
device.
2.6.1

Assembly

DANGER!
Personal danger due to electric shock or burns!
– The assembly and electrical connection must comply
with the national regulations.
– The device is connected via a plug connection as per
EN 60309.
See Assembly / commissioning page 13.