Start - Wellsystem Spa Original-Gebrauchsanweisung

Operation
Function Button sequence
9./10. Audio System
Display bright-
ness
22
Description
Switch on the Audio System
Adjust the volume, levels 1 - 10
Press and hold the plus or minus
button for 2 seconds in order to
activate the fast mode.
Switch off the Audio System:
Press and hold the minus button
until
If the plus button is pressed imme-
diately afterward, then the Audio
System is switched back on. If the
plus button is not pressed within 3
seconds after switching off, then
the LEDs no longer light up. The
music is not switched on until the
music / volume button is pressed
again.
Select music title, 1-200
Press and hold the plus or minus
button for 2 seconds in order to
activate the fast mode.
Adjust the display brightness,
levels 1-5
5.4

Start

Close the canopy.
Touch the START/STOP button.
Functions can be selected before starting the device. An active function is
indicated by the corresponding LED. If no functions are selected before start-
ing the device then only the coloured light is switched on.
Information
The current volume is shown on the
display. If the music is played back
from an SD card then the TRACK
LED also lights up in addition to the
Music LED.
If an MP3 player is connected, then
the playback switches from the SD
card to the MP3 player. The TRACK
LED switches off. The TRACK button
no longer functions.
The current title is shown on the dis-
play.
Note:
The playback is continued from the
SD card the next time the Wellsystem
Spa is started.