Starter - Wellsystem Spa Original-Gebrauchsanweisung

09/2011 1010400-00
– The collagen pressure lamps possess a reflector which directs the light
outwards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the side of the machine.
– Push the pins vertically into the socket from above.
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the user).
6.6.1

Starter

Replace faulty starters immediately.
You can recognize a faulty starter by the blackened ends of the low pressure
lamps or when the low pressure lamps can no longer be started.
Operating a low pressure lamp with a faulty starter significantly shortens its
service life. The lamp loses power and may begin to flicker under certain
circumstances.
– Turn 90° and carefully remove from the socket.
Cleaning and maintenance
Operating instructions – 29