Assembly / Commissioning; Assembling The Device - Wellsystem Spa Original-Gebrauchsanweisung

3

Assembly / commissioning

09/2011 1010400-00
Two people are required for the assembly.
The device is delivered ready to be plugged in.
A transport bracket simplifies positioning the device on the massage device.
3.1

Assembling the device

NOTE:
If there is any dirt and oil residue on the massage device
frame then the adhesive surface of the hook-and-loop strips
will not adhere properly.
Clean the massage device frame with the cleaner that you
usually use – see the massage device operating instructions.
WARNING!
Damage to the massage device!
The rubber blanket can be damaged or the paint scratched
when placing the Wellsystem Spa on the device.
– Place it on the massage device with care.
There are hook-and-loop strips on the bottom left and right which serve to
attach the device to the massage device.
– Separate the hook-and-loop strips on both sides.
– Remove the film from the two hook-and-loop strips.
Assembly / commissioning
Operating instructions – 13