Technical Data - HYDAC ELECTRONIC AquaSensor AS 3000 Bedienungsanleitung

24
18

Technical data

Input data
Level of saturation
Temperatur
Operating pressure
Pressure resistance
Mechanical Connection
Tightening torque, recommended
Parts in contact with fluid
Fluids
Output data
Switching outputs
Analogue output,
permitted load resistance
Calibration accuracy
Accuracy in media measurements
Pressure dependence
Environmental Conditions
Compensated temperature range
Operating temperature range
Storage temperature range
Medium temperature range
mark
Protection type to DIN EN 60529
Other data
Supply voltage
Current consumption
Residual ripple of supply voltage
Display
Weight
Note: reverse polarity protection, short circuit protection provided.
FS (Full Scale) = relative to complete measuring range
1) -25 °C with FKM or EPDM seal, -40 °C on request
with mounted mating connector in corresponding protection type
2)
Edition: 2020-04-20
0 .. 100 %
-25 .. 100 °C [-32 .. +112 °F
-0.5 .. 50 bar [-7.3 .. 725.2 psi]
≤ 630 bar [≤ 9000 psi]
G3/8 A ISO 1179-2
25 Nm
Mechanical connection:
stainless steel/vacuum-metallised ceramic
Seal: FPM or EPDM
Mineral oil based fluids, synthetic and natural esters
Viscosity range:
Flow velocity:
PNP transistor outputs
Switching current: max 250 mA per switching output
Switching cycles: > 100 million
Selectable:
4 .. 20 mA
0 .. 10 V
≤ ± 2 % FS max.
≤ ± 3 % FS max.
≤ ± 0.02 % FS / bar
0 .. +80 °C [-32 .. +176 °F]
-25 .. +80 °C [-13 .. +176 °F]
-40 .. +80 °C [ -40 .. +176 °F]
1)
-40 .. +100 °C / -25 .. +100 °C
[-40 .. +112 °F/ -13 to +112 °F]
EN 61000-6-1 / 2 / 3 / 4
2)
IP 67
9 .. 35 V DC,
18 .. 35 V DC,
≤ 0.590 A
≤ 90 mA
≤ 110 mA
≤ 5 %
4-digit, LED, 7 segment, red, height of digits 7 mm
approx. 145 g
HYDAC ELECTRONIC GMBH
1 .. 5000 cSt
< 5 m/s
load resistance max. 500 Ω
load resistance min. 1 kΩ
if PIN 2 = SP2
if PIN 2 = analogue output
with active switching outputs
with inactive switching outputs
with inactive switching output
and analogue output
AS 3000 IO-Link
Part No.: 670006 E