Inspection; Spare Parts; Replacing The Cylinder - Aventics ITS Betriebsanleitung

72 AVENTICS | ITS | R412020619–BAL–001–AD

Replacing the Cylinder

Danger of injury when removing connections!
Cables, electrical connectors, tubing, valves and cylinders may not be removed as long as the
system is under voltage and pressure.
Make sure that all relevant system parts are not under voltage or pressure before
removing the cylinder.
Protect the system against being switched on.
3. Remove dust deposits from the cylinder. Remove other
production-related deposits from the cylinder and adjacent
system parts if necessary.
4. Before re-commissioning the system, return all barriers and
signs removed before cleaning to their original position.
5. Document the cleaning, e.g. in a cleaning schedule.
9.2

Inspection

Perform a monthly visual inspection to check for integrity. Also
remove dust deposits from the housing during the inspection
(see "9.1 Cleaning the cylinder" on page 71). Document the
inspection.
It is the responsibility of the system owner to inspect the
overall system (see "2.8 Responsibilities of the system owner"
on page 51).
9.3

Spare parts

Order spare parts from AVENTICS by entering the part number
that is located on the devices or individual components (see rating
plate or label). The address is printed on the back cover of the
instructions.
10 Replacing the Cylinder
WARNING