Aventics ITS Betriebsanleitung Seite 69

Danger of injury due to objects in the range of cylinder travel!
Objects that protrude into the travel range of the piston rod or the useful load can be carried
or hurled away during commissioning or operation. This could lead to injuries.
Make sure that no objects project into the travel range of the piston rod or the useful
load.
Danger of injury due to loose tubing!
Pressurized tubing can break free and move uncontrollably, potentially causing eye and ear
injuries.
Always wear goggles and ear protectors during commissioning.
Check that all tubing and fittings are firmly connected before applying pressure.
Danger of burns caused by hot surfaces!
The valve, cylinder and adjacent system parts are heated during continuous operation.
Contact with these surfaces can result in burns.
Do not touch the cylinder or adjacent system parts while the system is in operation.
After switching off the system, first allow the heated components to cool before touching
the surfaces.
Damage to the cylinder caused by changing the medium!
Once oiled compressed air has been used in the system, the choice of this medium cannot be
reversed without damaging the cylinder.
Never change from oiled to oil-free compressed air.
Commissioning
AVENTICS | ITS | R412020619–BAL–001–AD
WARNING
CAUTION
NOTICE
Proceed as follows:
1. Make sure that the cylinder housing is undamaged. Operation
is prohibited in a damaged housing.
2. Slowly pressurize the entire system until the working pressure
is achieved
Min./max. working pressure.: 3 to 10 bar
Commissioning and Operation
67