About This Documentation; Documentation Validity; Required And Supplementary Documentation - Aventics ITS Betriebsanleitung

AVENTICS | ITS | R412020619–BAL–001–AD
1

About This Documentation

1.1

Documentation validity

This documentation applies to ITS series configurable cylinders
(optionally with valve), Ø160–Ø320, intended for use in explosive
areas. In this documentation, the designation "cylinder" refers to a
cylinder that can be configured with the following components:
a CD12 series valve
attachments such as mounting elements
individual electrical devices such as sensors and coils
This documentation also deals with configured valves.
Configurable individual electrical devices (sensors and/or
coils) as well as attachments are not described in this
documentation (see "1.2 Required and supplementary
documentation" on page 45).
This documentation is geared toward system planning engineers,
machine manufacturers, and assembly technicians. This
documentation contains important information on the safe and
proper transport, assembly, commissioning, operation,
maintenance, and disassembly of the product, as well as steps the
system owner can take to remedy simple malfunctions.
1.2

Required and supplementary documentation

Depending on the configuration, the ITS series cylinder (optionally
with valve) is equipped with individual electrical devices (sensors
and/or coils). The individual devices are not addressed in these
operating instructions.
Only commission the product once you have obtained the
relevant documentation for your configuration and understood
and complied with its contents.
Table 1 contains a list of the valid documentation for individual
devices.
About This Documentation
45