Delivery Contents; About This Product; Use In Explosive Areas - Aventics ITS Betriebsanleitung

Damage due to incorrect cylinder mounting!
Incorrect mounting can result in damage to the cylinder.
Make sure that the cylinder and accessory parts are properly installed.
Observe the maximum torque values and check that all screws and bolts are properly
tightened.
Observe current technological standards.
Danger of explosion due to circulating currents!
Stray magnetic fields may cause circulating currents, e.g. near electrical drives with
asymmetrical loads, during arc welding, if the ground is conducted via the system and not via
a 0 V line, or if there is cathodic corrosion protection.
Make sure that there is protection against the possible effects of circulating currents.
AVENTICS | ITS | R412020619–BAL–001–AD
NOTICE
4

Delivery Contents

1 cylinder in accordance with configuration
1 set of operating instructions
Operating instructions for the configured individual electrical
devices
The cylinder has been individually configured according to
your requirements. You can display the exact configuration in
the AVENTICS Internet configurator using your order number.
Ensure the full scope of delivery by comparing the cylinder
with your configuration.
5

About This Product

5.1

Use in explosive areas

DANGER
53
Delivery Contents