Inspection; Spare Parts - Aventics CVI Series Betriebsanleitung

Ordering spare parts
AVENTICS | CVI/TUS | R412004532–BDL–001–AE
3. Remove dust deposits from the cylinder valve unit. Remove
other production-related deposits from the cylinder valve unit
and adjacent system parts if necessary. Clean the components
using a dry or slightly damp cloth.
4. Before re-commissioning the system, return all barriers and
signs removed before cleaning to their original position.
5. Document the cleaning, e.g. in a cleaning schedule.
9.2

Inspection

Perform a monthly visual inspection of the cylinder valve unit
to check its integrity. Remove dust deposits from the housing
during the inspection (see 9.1 Cleaning the cylinder valve unit).
Document the inspection.
It is the responsibility of the system owner to inspect the
overall system (see "Responsibilities of the system owner" on
page 52).
9.3

Spare parts

Order spare parts from AVENTICS by entering the part number
that is located on the devices or individual components (see rating
plate or label). The address is printed on the back cover of these
instructions.
73
Service