Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-20
Assembly C: Attaching to a recessed hanging cabinet
Assembly C: Attaching to a recessed hanging cabinet
Materials required for assembly
(1) Exhaust hood, 1×
(11) Retaining plate, short, 2×
(12) Screw 4.0 × 18.0 mm, 4×
(13) Screw 4.0 × 10.0 mm, 6×
A suitable recess for the cabinet
– Minimum distance between cooker
and lower edge of exhaust hood (1):
65–75 cm.
– The hanging cabinet must hang exactly
above the hob.
– The recess must meet the following re-
quirements:
– 60.0 cm in width
– 28.0 cm in depth
– > 20.0 cm in height
Attaching the Exhaust hood
CAUTION
Fire hazard!
The distance between the cooking
■
surfaces and the lower edge of the
(1)
Exhaust hood must be at least 65 cm
for gas cookers.
For gas stovetops, you must read the
■
(11)
user manual for the stovetop! If the
manual stipulates a larger distance,
(12)
this must be observed.
(13)
1. Turn the six screws (13) through the re-
taining plate (11) into the corresponding
openings on the exhaust hood.
Do not secure them too tightly; it must be
possible to shift the retaining plate.
2. Position the exhaust hood in the desired
position and screw the two retaining
plates (11) tightly into the side walls of the
recess using the four screws (12).
(13)
(11)
(11)
(12)
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
