Changing The Led Bulbs - hanseatic SY-6002C-P3-C84-L32-600 Gebrauchsanleitung

Page EN-12 Care and maintenance
(19)
5. Place the new activated charcoal filters
on the left and right side of the motor: Put
the holding lug into the rectangular open-
ing, place the filter onto the motor, and let
the locks click into place.
6. Place a grease filter with the pins into
the openings on the left side.
7. Slide the lock to the left; snap the grease
filter in and release the lock.
8. Repeat this step for the other grease
filter.
9. Switch the power back on.
10. Dispose of the used charcoal filter with
household waste.
(20)

Changing the LED bulbs

WARNING
Risk of injury!
Should one of the LEDs stop working,
■
it must be changed by an authorised
service technician.
Note for the service technician:
This exhaust hood requires LEDs with the IL-
COS D-Code DR-3/65/1B-H-GU10-46/50; 2×
3 W and 220-240 V.
46
22,5
5