Attaching The Exhaust Hood - hanseatic SY-6002C-P3-C84-L32-600 Gebrauchsanleitung

Attaching the Exhaust hood

WARNING
Risk of injury!
Improper installation of the appliance
can lead to injury.
Before drilling the holes, ensure that
■
no wires or cables (power, gas, water
etc.) will be damaged (check with a
line locator).
CAUTION
Fire hazard!
The distance between the cooking
■
surfaces and the lower edge of the
Exhaust hood must be at least 65 cm
for gas cookers.
For gas stovetops, you must read the
■
user manual for the stovetop! If the
manual stipulates a larger distance,
this must be observed.
(f)
(g)
1. Mark six drill holes in the hanging cabinet:
(f): 60 mm
(g): 194 mm
(h): 516 mm
(i): (Cabinet width - 516 mm) / 2
Assembly B: Mounting beneath a hanging cabinet
2. Insert the exhaust hood and use the six
3. To ensure the exhaust hood is firmly an-
(i)
(h)
The exhaust hood is now mounted.
(9)
(8)
screws (9) and washers (8) to fix it in
place.
(10) (7)
chored, turn the screws (10) through the
openings of the holding plate (7) from
below.
Page EN-19