Assembly A: Use Angle Bracket; Materials Required For Assembly; Screws For Wall Mounting; Dimensions For Mounting - hanseatic SY-6002C-P3-C84-L32-600 Gebrauchsanleitung

Page EN-16

Assembly A: Use angle bracket

Assembly A: Use angle bracket

Materials required for assembly

(1) Exhaust hood, 1×
(5) Angle bracket, 2×
(6) Screw 4.0 × 10.0 mm, 2×

Screws for wall mounting

The screws and wall plugs required to mount
the appliance on a wall are not included in
the package contents, as their type and di-
mensions will vary depending on the charac-
teristics of the wall. Please have a specialist
advise you as to which ones you need.
(5)
To hang and secure the hood, you will also
need the following in addition to the package
contents:
– 2 flathead screws measuring 4.0 × 30.0 mm
and the matching wall plugs for fixing the
angle bracket (5) in place.
– 2 round-head screws for the keyhole open-
ings (22) measuring 4.0 × 30.0 mm, as well
as the matching wall plugs.

Dimensions for mounting

(1)
(5)
(6)
(a) Minimum distance between cooker and
lower edge of exhaust hood (1):
65–75 cm
(b) Height at which the round-head
screws (22) should be attached:
15.0 cm
(c) Height of the screws for the angle
bracket (5): 18.8 cm
(d) Distance between the screws:
51.6 cm
(e) Distance between the keyhole open-
ings (21): 49.6 cm
(15)
(22)
(d)
(e)
(b)
(a)
(c)